![]() This is particularly useful for different reoccurring podcasts, or multi-user devices. Pad illumination colour is user adjustable, and up to eight pages of pads can be stored. The audio can be recorded directly into the RODECaster Pro, or via a computer using the ‘drag and drop’ functionality of the included software. To the right of the faders, eight backlit touch pads can be programmed and used to instigate sound effect and jingle playback. There is also an illuminated solo button associated with the output fader. Illuminated input channel selection buttons and illuminated mute and solo buttons for each input are located above or below the respective channel fader. The main control surface also houses faders for all inputs and outputs. A rotary control on the main control surface allows adjustment of the speaker output level.Īlong with an intuitive touch screen display, the main surface of the RODECaster Pro has a large ‘REC’ record button which illuminated red when active. Dual balanced 6.35mm jack outputs are provided for connection to external monitor loudspeakers. ![]() This output is designed for a mixing engineer who isn’t necessarily part of the podcast recording. A fifth headphone output via 3.5mm jack connection is located on the front facing panel. Each of the four headphone output levels can be controlled via rotary volume controllers on the main control surface. If using this mode, the audio in the headphones may not truly reflect the recorded audio. Limiting can be applied to the headphone outputs to avoid acoustic shock and to prevent damage to the user’s hearing. ![]() In addition to the microphone inputs, a USB-C connection allows conversation with compatible computer along with audio playback, a 3.5mm TTRS input for connection to a mobile phone, and Bluetooth connection – the latter two useful for phone call inclusion.įour 6.35mm TRS jack headphone outputs are located on the rear facing panel, all of which give the same mix as that that is being recorded to the microSD card. ![]() The user can add independent processing to each of the microphone channels via the intuitive touch screen display menu, with options of compression, high-pass filter, de-esser, ducking, along with the popular APHEX Aural Exciter and APHEX Big Bottom being on/off switchable. The four microphone inputs have been designed with Class A, servo-based preamps to give a ‘cleaner gain structure’ whilst lowering distortion levels. Operating as a standalone production studio, RODECaster Pro is able to capture audio from up to four microphones via 3-pin XLR inputs with switchable +48V phantom power. Categories By brand New products Audio and data connectors Video and RF connectors Power connectors, distribution and batteries Connection panels and stageboxes Fibre optic cables, connectors and interfaces Cable assemblies, patchcords and leads Cables Cabling accessories and tools Bags and cases Racks and enclosures Rack accessories and hardware Lights, clocks, furniture, fittings and equipment supports Drives, memory, media, labelling and sound effects Microphones Radio Microphones Microphone supports, amplifiers, powering and accessories Headphones, headsets, earpieces, amplifiers and wireless systems Hearing protection and noise control Record, replay and radio receivers Audio interfacing Video interfacing, processing, monitoring and camera accessories Audio mixers and processing Amplification Loudspeakers and audio monitoring Test and measurement Communications, conferencing and datacoms Assistive Listening Index By brand Index New products Special offers Clearance list ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |